REZOTONE USB key : Gasoline saving

When REZOTONE USB is in vehicle, the surrounding space is harmonised, and driver will not feel tired. Motor works efficiently causing the structure of gasoline to change. As a result, it saves gasoline up to 18-30% depending on the vehicle model.Check how much gasoline is required for 100km without USB. The USB is required to be placed in vehicle 12 hours prior driving. Fill the tank up to the very top, first time. IMPORTANT: make sure to leave a quarter of gas in the tank between refills, as to mix the old and new gas. This procedure will maintain the USB’s efficiency, and use the same gasoline station and the same column.

After use there is a noticeable difference in efficiency. It also works for trains, boats and small airplanes. Example: In Russian Siberia, during the wintertime, temperature falls to -50 C below zero. There is no heating garages for big cars like BELAZ. The motor in the vehiclework from autumn until springtime without stop over. By using this technology, saving for the gasoline was up to 30%.

REZOTONE USB SILVER STICKERS : Gasoline saving

Collect your data, do the same as with the Rezotone USB, compare the gas efficiency. Make sure to use the same gas station, and a distance of 100km per each test ( at first without STICKER).
The SILVER MINUS sticker is required to be placed in vehicle 12 hours prior driving After will start to count saving.

IMPORTANT: make sure to leave a quarter of gas in the tank between refills, as to mix the old and new gas. This procedure will maintain the SILVER STICKER efficiency.

BUY rezotone usb 12

#1 Fuel saving – Rezotone R8A

Rezotone R8A was specially designed as a low cost long life device for fuel saving in passanger cars.

For R8A Gas Saving Order below

BUY R8A GAS SAVING

This test was done with the previous gas saving program,

but now was created much more advances new programs which in set of  NEW SILVER STICKERS.

European cars of the RENAULT, AUDI, VOLKSWAGEN, VOLVO, MERCEDES, PEUGEOT, etc. brands

receive fuel savings from 12 to 30% . Cars of American brands, such as FORD and CHEVROLET from 15 to 20%.

Asian cars – Japanese, Chinese and Korean – from 5 to 12%. Russian brands of cars – cars and trucks – from 15 to 30%.

USB REZOTONE also have fuel saving program, but now we have more advanced programs in set of new SILVER STICKERS.

TESTIMONIALS about fuel saving program.

FINOLA, Ireland, January 2023
 
Definitely noticing a difference with the Gaz saving when the rezotone is plugged into the car, brought my nieces shopping before Christmas in Dublin which is 100 miles away and expected to have to refill on the way home and didn’t have to until 2 days later. 
Very happy with the rezotone, it might be saving my life in lots of ways.

 

Amie, LA, USA, 21th of January 2020

“I currently have three of your USB devices. I love your USB REZOTONE keys. They even help with my gas mileage in my car by 4 mpg! I would like to buy three more from your website, so I can add a couple more in my house for 5g protection and one permanently in my car. My husband also keeps taking my other one to put into our car when we drive out of town. My gas mileage goes from 25 mpg to 29 mpg when we plug in the key to the car

 

NORM, UK

Hello Beautiful Julia,
I would like to also say that I am enjoying my fuel/gas savings in my car. I am truly grateful for the savings. Thank you to the Angels and All of You. You are greatly appreciated.
All the best, NORM, UK
 .

 

Carol, Canada

I have been using this USB stick for a week now and I see a profound shift in the energy around me using phones, computer and so forth. I sleep better, have more clarity and it works really well in the car. 

Nancy Collins, 81, Cape Cod, MA. USA

Definitely, my car is driving very smoothly, and my oil consumption is way up and is running fabulous !

A team from SWISS tested the gas stickers.

Their findings where that the plus/minus stickers gave an efficiency of 12%.

“Dear Julia,
We have a first valid test result on the R8A on an AUDI RS4 car, which came down from average 8,5 L/100 kg to 7,5 L/100 km. Which is 12 % !!! Just great. Many thanks and best regards, Team from SWISS”

Rezotone R8A was specially designed as a low cost long life device for fuel saving in passanger cars. 

Our technology allows you to save more than 30 percent of fuel.

It does not require any alterations in the engines and the design of the installations. It is used both on petroleum and diesel engines. 

DETAILED DESCRIPTION

 R8A does not require external power supply.

Conforms to all European and US regulations.

 Attaches to the wires going to the battery.

Consists of a set of two passive elements shown in the photo.
Each piece is the size of a credit card. 

Can be installed by any person

Does not require maintenance.

Lifetime – 10 years.

Operating temperature range -60 +120 C

How can we easily and quickly measure the efficiency of our fuel-saving devices?
We need to do two experiments.
 
THE FIRST EXPERIMENT :-
 
Fill the car with fuel up to the throat of the fuel tank. You need to fill it so that the fuel starts to flow out of the tank. IMPORTANT : Most gas stations have a mechanism for shutting off the fuel fill when filling the tank. In this case, the shutdown does not occur at the maximum level. To fill the tank before the fuel leaks out of the tank – manually hold the gun handle in the ON state.
Another important issue in filling to maximum is that some tanks have a complex shape and air pockets. After filling to the maximum for a few minutes, observe whether the fuel level does not decrease. If it decreases, slowly add some extra  fuel until the level remains stable for a few minutes. When pouring diesel fuel, pour especially slowly, letting the foam go away.
– After filling the tank, close the lid and drive any distance on any road at a FIXED CONSTANT speed. It is better if you have cruise control to fix the speed. To avoid speed changes, select a time when there are no traffic jams. Also choose a slightly lower speed than is usually used on this road. Turn on the emergency light so as not to annoy other drivers with your reduced speed. – We recommend driving a hundred or more kilometers. – Drive so as to return to the same gas station from where you started.- After returning to the gas station, fill the tank again to full level. – The amount that you fill in will be fuel consumption without our devices. This completes the first experiment.
– now you can install our fuel saving devices. INSTALLATION FEATURES: You need to attach one device to the cable coming from the negative terminal of the battery. The orientation of the attachment, the distance of the attachment point to the battery does not matter. Attach another device to the fuel tank close to the bottom of the tank. The range of our devices is about 40 centimeters. It should be attached to the bottom of the tank so that the devices can act on fuel even when there is not enough of it in the tank. If you have a tank of more than 80 centimeters in maximum size, then use several devices at some distance from each other. If you have an aluminum tank, then you need to use special devices for aluminum tanks. On such devices there is a letter A.
– After installing our devices, take photos of the installation location and send them to us for control. – Wait 48 hours after installation to fully activate our devices. – After 48 hours, check with our manager whether your car is ready to save fuel. If you are ready, proceed to the second experiment.
 
THE SECOND EXPERIMENT:-
Do everything exactly the same as in the first experiment. Refuel at the same gas station and on the same column. Drive on the same road and at the same speed. The mass of the car should also be the same as in the first experiment. Even the air temperature should be approximately the same. All these factors affect fuel consumption. Therefore, if you want to make an accurate experiment, then all the conditions of the first and second experiment must be the same. In particular, it is important that the car in both cases was equally warmed up at the beginning of the experiment. – After the end of the second experiment, compare the amount of fuel consumed in the first and second experiment. If in the first experiment you spent 6 liters, in the second experiment 4 liters, then the fuel economy thanks to our devices will be 30 percent. ATTENTION: after removing our devices, the car may consume less fuel for another month. So if you want to find out the effectiveness of our devices with different car loads, then first conduct experiments with different loads without our devices, then experiments with different loads with our devices.
FEATURES OF THE OPERATION OF OUR DEVICES.
 
For more efficient operation of our devices, we recommend refueling when there is more than 25 percent fuel in the tank. In this case, the old fuel will help our devices activate the new fuel faster. Such topping up will also help your fuel  pump. Otherwise, if you drive before the light bulb lights up, then garbage from the bottom of the tank gets into the fuel pump and it fails faster.

IMPORTANT INFORMATION

Our devices do not change the property of the fuel instantly, but within a few hours. Therefore, in order to achieve maximum efficiency and maximum savings, we recommend refueling not when the tank is already empty, but when there is still about 25 percent of fuel left. The old fuel will mix with the new fuel and the new fuel will be structured faster.

ATTENTION

Our device creates micro-radiation, which is transmitted not only to fuel, but also to car parts. And these details themselves also begin to be a source of radiation. After removing the device from the car, the car parts continue to radiate and affect the fuel for about a month. Therefore, if you want to check the efficiency of our device, then first measure the flow rate without our device, and only then with our device.
If you do the opposite, then the car parts will continue to affect the fuel and you will get the wrong result. Therefore, ALWAYS measure first without our device, and then with our device.

Federal Agency for Technical Regulation and MetrologyCERTIFICATE OF CONFORMITYMicrocontroller device to reduce the effects of electromagnetic fields “Rezotone”

GAS SAVING RESULTS